Fret Buss? there can be several reasons for that, this Schecter had a problem that I’d never encountered before… I’ve never encountered a bridge so bent out of shape. The top should be flat, with a curved bottom… I can’t fix that so it had to be replaced, there’s the new one, flat top, curved […]
Category: Repairs
Flying V – Hard Landing
They say flying is easy, it’s the landing that can bight! Well this Flying V may have flown well but it must have been a hard landing! I’m not sure what happened but the neck pocket has been split along the line of the neck. It should have been quite simple. I opened up […]
The Story of the Guitar Heroes
What a fantastic night out, watching The Story of the Guitar Heroes in the New Theatre Royal Lincoln. I’ve been struggling for more years than I care to remember to master the Guitar, I could practice for 25 hours a day for the next 200 years and I’ll still not achieve these levels! The playing […]
US Fender Stratocaster – Re-Fret 2nd Update
I’ve got a few pre-shaped bone nuts but, alas, none that would fit. The only other blanks I’ve got are a little large and will therefore need a little more work to make one fit. Once I’ve cut it roughly down to size (I’ll get at least 2 nuts from that blank) I’ll use the sanding disk to […]
US Fender Stratocaster – Re-Fret
Just now and again something really nice comes across the bench. In this case an early 90s US Stratocaster. What’s nice, and almost a little odd is the condition. The frets are badly worn, it really has seen some use. However it’s also been well kept and is in fantastic condition, this guitar really has been loved. Really […]
Fender Broken Headstock
Ouch! Bet that hurt…. Luckily it’s a clean break, along the grain and the parts fit together well. The veneer on the face of the head has kept it together. The guy taped it back together to keep it in place which is good. If you ever do break something like this it’s always best […]
Jackson Fusion Pro – Floyd Rose Replacement
Jacksons have never been my style, I find them a little too extreme, but this one is nice. The main problem is the Floyd Rose is rather worn, in particular the screw threads have been stripped out There really isn’t much I can do with that but replace it. At some point the Guitar has also […]
Gretsch Fret Dress
Had a quiet week or so but back to work with a rather nice Gretsch Nothing much really wrong with it apart from a bit of buzzing around the 14th fret. Looking closely there were a few slightly high and some worn frets so a fret- dress should sort that out, (the black marks are […]
Gibson Flying V -5th Update
Got the wiring finished so all the bits and pieces back in place. Just one part missing, needed re-chroming which I really can’t do! Once that comes back all it’ll need is a new set of strings. To see the start of the project click here.
Gibson Flying V – 1st update
Having sorted out the sheered off strap button screws etc. Next I removed all the old bits and pieces, pickguard with electrics before giving the body a good polish to remove all the old dirt and minor scratches. Ready to start building in the new parts. Click here to see the start of the job.