With the cleanup finished all that’s needed now is to put it all back together and set it up. First then the curve in the neck.
It had a little too much of a bend so I tightened the truss rod a little…
I had a look at the action at the 1st fret, it’s fine.
The action at the 12th fret was however a little high so I dropped the bridge down a little.
The Intonation was out by quite a bit but I’ve put that right…..
by moving the bridge saddles.
Lastly I had a look at the pickup heights. It’s not something I had touched but the neck pickup was considerably louder than the bridge pickup.
Job done, just a little bit of spit and polish….
