What a fantastic night out, watching The Story of the Guitar Heroes in the New Theatre Royal Lincoln. I’ve been struggling for more years than I care to remember to master the Guitar, I could practice for 25 hours a day for the next 200 years and I’ll still not achieve these levels! The playing […]
Tag: Custom Built Electric Guitar
Fender Stratocaster – Build
Putting a guitar together may seem easy but the devil is in the detail! Despite what it says I suspect this neck isn’t genuine Fender, if it is, it’s a Friday afternoon special, the frets are all over the place. If It’s to play nicely they’ll need levelling first. The masking tape is to protect […]
Custom Build Explorer
I like a challenge now and again. A young lad has built this body but needs a little help getting the neck and bridge lined up properly. It only takes a millimetre out at the neck and the strings’ll never sit properly. It’s also vital that the bridge is in exactly the right place or it’ll […]
Telecaster rebuild
Wow, an interesting mix of old and new. The neck is genuine Fender, but I don’t know about the rest. The body’s probably the heaviest Telecaster I’ve ever come across. I’m going to fit the neck to a new body with a mix of old and new hardware. The first stage is to sort out the […]
Fender Stratocaster – Custom build
A collection of bits and pieces, put together should make a nice guitar… To make it a really great guitar, rather than just an average one I levelled the frets. Firstly making sure the neck is level.With it nice and flat, grind down the fret tops to a common level….Once levelled each fret needs to […]
Telecaster Build
I’ve just been given a mixed bag of bits, some old some new, to put together…. I think there’s a very nice Telecaster in there somewhere! But where to start?How about at the top, the machine heads. First the guides.. they’re rather tight so rather than hammer them in and risk damaging them I pressed them […]
Left/Right hand Stratocaster
Here’s an oddball, is it a Left-hand or Right-hand Strat? The owner had it custom made but it just needed a few tweeks to get the full potential from it. The first problem was the nut. The grooves were much too shallow which made the playing action at the first fret way too high. But […]
#Jackson – Project
I picked this up a week or so ago. It’s not something I would even consider but a good friend of mine bought it on e-bay and it wasn’t exactly what he expected so I’ve taken it off his hands and I’m going to see what I can do with it. The first thing I did was […]
Jazzmaster Build – Final update
At last the pickups have arrived so I’m on the final lap. The only problem is, they don’t fit! The standard covers the pickups came with are designed to mount differently. The pole pieces are slightly closer together… The covers have 4 holes for mountings but the pickups have 2, one at each end.. All I can […]
Jazzmaster Build – 4th update
While I’m waiting for the last couple of parts I fitted the strap buttons. Carefully marking the centreline… I thought that was all I could do today until the postman arrived. Again I marked out the centreline and screw holes, making sure everything is square. Drill the holes……. and screw it in place… Just the pickups […]