With a new neck plate I was able to re-fit the neck. At least it looks like a Guitar again. With the strings fitted I reset the neck set. with a tweek of the truss-rod. Reset the action height. and lastly the intonation. At long last, all back together. To see the project from the […]
Tag: Electric Guitar Service
BC Rich Bass
The new blank is a little thin but at least it’s long enough. In fact a little too long so I’ll have to take a little off the end. It doesn’t have slots marked so I need to mark them myself….. and start the slots. While the strings are off I gave the fretboard a […]
Hohner Rockwood Re-build, 3rd update
I was going to put the old frets back but they are rather worn so I thought I may as well put new ones in. Clean out the fret slots, although they are already a little deep for the tangs on the new wire. Bend the fret wire into a curve… and tap it into […]
Tremol-No
What a great idea. A real easy way to lock your trem’ in place. It just replaces the claw for the trem’ springs and has a rod that locks into the trem’ block. The thumb wheels can either lock the trem’ or be loosened off to allow the trem’ to move as normal.
Fender Stratocaster, pickup switch
I do love these, they look just fantastic. This one just has a slight problem with the pickup switch. A slightly dry contact somewhere leading to an intermittent contact. Switch cleaner can sometimes do the trick but ultimately the only guaranteed way is to replace it… The new one in place… That should do the […]
Epiphone Les Paul – Fret Dress and Bone Nut
I’m often asked what’s the best way to improve an average guitar? The first thing to consider is do you want to improve the sound it makes or the way it feels to play? The first is easy, strip out the pickups and fit something special, Bare Knuckle are probably my favourite, and their choices are […]
Hohner Rockwood Re-build – 2nd update
I’ve had quite a problem getting the lacquer to adhere to the surface of the fretboard. However, I’ve got a good base coat on now. Once it’s good and dry I’ll use some fine “wet and dry” to blend it back to get a nice flat surface and put another half-dozen coats on. While I’m waiting for […]
Gibson Les Paul – Overhaul, Final update
With all the parts together now all I have to do is put it all back together. Life is never that simple though, the pointers for the Vol/Tone controls don’t fit the pots’. Not a big problem, I just need to file the hole out a little. With the new pots’ fitted, wire them all […]
Gibson Les Paul – Overhaul, 1st update
Got the frets polished… Next I turned my attention to that broken nut. I used a grinding disk to cut a bone blank to the required size… It’s a fiddley job which I rather hate, the job is easy, it’s just the smell of grinding bone, like working in a slaughter-house! yuk. It needs a […]
Gibson Les Paul – Overhaul
This one is going to take a while, I like a challenge now and then! It’s perhaps going to take longer than I thought but since it’s a quality guitar it shouldn’t be too difficult. The guitar with the new parts… Along with the new parts it also needs a little bit of TLC, the […]