Maverick, fret-dress and setup

I don’t think I’ve had one of these on the bench before.  Not quite my cup of tea but different.  It’s obviously had a lot of use and needs a spot of TLC.  The frets are a little worn and the fret-board has several years worth of goop on it.  There were also a couple of high […]

Very Green Ibanez!

Quite a long job this one, been on the go for a couple of weeks.  The customer wanted a really nice setup, which really ment a fret dress before he had the body re-painted.  I though it was a bit daft to do the setup twice so ended up pulling it apart and doing the […]

Custom Build 4th update

Things have been a little quiet in the workshop this week, a couple of minor jobs but nothing worth putting on the blog. I did find some time to finally wire in the custom job I’ve been working on in my spare time, I just haven’t had much spare time lately. I’m not so keen […]

Rickenbacker 360

An unusual request, a water damaged guitar.  The chap had a burst pipe in his house that pretty well flooded the place.  Luckily the Ric wasn’t soaked but you can see where the damp has got to it.  Actually extreme dryness can cause more damage to a guitar than damp can! The frets are a […]

Jim Harley “Rickenfaker”

Something I bought ages ago but never quite had the time to finish off It started out as a £150 second hand Jim Harley… I’d always fancied a Rickenbacker 350 but couldn’t really afford one so I though I could do something with this.? The frets aren’t too badly worn, a little uneven but a […]

Squire Strat with new Tele Neck – Update

Had a spare slot this week so managed to finish off the Strat’.  What a job, I like a challenge sometimes but not like this one… Not only were the frets very uneven but the truss-rod is stuck solid.  There is a slight back-bow without the strings so I bolted it on the jig to […]

Tanglewood Health Check and Setup

How well does your guitar play?  You probably take your car in to be serviced regularly but what about your prized Guitar?  Normally people come to me with problems but just now and again it’s just for a quick “once over”  Had one today, I think it’s for sale and the guy just wanted to […]

Fender Strat – Floyd Rose setup – completed

Got the screws… all I need to do now is put the springs back and fit a new set of strings… Now for the balancing act!  adjusting the tension of the springs against the tension in the strings so that the tailpiece sits parallel with the body. Complete the rest of the setup and it’s ready […]

Fender Strat – Floyd Rose setup

A classic guitar in need of a little TLC… The main reason for getting into this one is that the Floyd Rose is sitting flat on the body, effectively a hard tail. With the rear cover off I can see why, the spring claw is screwed right in… Apart from that the heads on the […]

Squire Strat with new Tele neck

A chap came to see me with an upgrade he has had a problem with.  It seemed like an easy job, fit a new neck on to an old body. This is as far as the screws got before they jammed solid and tore the heads out… The problem is the holes in the body […]