How well does your guitar play? You probably take your car in to be serviced regularly but what about your prized Guitar? Normally people come to me with problems but just now and again it’s just for a quick “once over” Had one today, I think it’s for sale and the guy just wanted to […]
Tag: Electric Guitar Setup
Fender Strat – Floyd Rose setup – completed
Got the screws… all I need to do now is put the springs back and fit a new set of strings… Now for the balancing act! adjusting the tension of the springs against the tension in the strings so that the tailpiece sits parallel with the body. Complete the rest of the setup and it’s ready […]
Squire Strat with new Tele neck
A chap came to see me with an upgrade he has had a problem with. It seemed like an easy job, fit a new neck on to an old body. This is as far as the screws got before they jammed solid and tore the heads out… The problem is the holes in the body […]
Epiphone Les Paul – Fret Dress and Setup
Been a quiet week, with nothing of real interest. A couple of fret-dressings. The last one a rather nice Epiphone Les Paul The fret-dress was a routine job, as was the setup.. The neck, unusually had very little set in it… The owner wants a fairly low action but I think it needs a little more […]
Peavey Restoration – Final Update
With the body complete, bolt the neck back on and set it up. Since the whole guitar has been apart everything will need re-setting, starting with the truss-rod. The rest of it was simple, Job done…. To see the job in full click here
Peavey Renovation – 1st Update
Got the body stripped down and cleaned. Nothing too severe, just enough to remove the surface dirt. I’ve also cleaned off the rust from all the tremolo screws. They all move freely now so I’ll be able to set the bridge height and intonation easily. I’ve stripped all the electrics from the pick-guard. I’m going […]
Squire Stratocaster – Fret Dress
A nice colour, in fact a nice guitar. I was asked to just adjust the setup but what it really needs is a fret-dress. Rather worn frets… After a few hours, level frets. Once it’s back together it will play as well as any new guitar. A lot better than when it was new, the frets […]
US Fender Stratocaster – Re-Fret – Final Update
All done. Cut the slots in the nut and finished off with a full setup. Looks even better with strings fitted. To see the re-fret in full click here.
US Fender Stratocaster – Re-Fret 2nd Update
I’ve got a few pre-shaped bone nuts but, alas, none that would fit. The only other blanks I’ve got are a little large and will therefore need a little more work to make one fit. Once I’ve cut it roughly down to size (I’ll get at least 2 nuts from that blank) I’ll use the sanding disk to […]
Fender Stratocaster – Setup
A nice new Stratocaster. Nothing much wrong with it, but the owner just wanted the action lowering and setting up. Starting at the top; the string height over the nut (measured at the 1st fret) was fine. The set in the neck was a rather high (0.023″) so I’ll straighten that out a little. The action height […]