It’s a sad reflection that some guitars are just not as good as they really should be. This is a lovely alternative to it’s Gibson cousin but still should be better. A little bit of attention to detail though and it’ll be better than the Gibson… The action at the 1st fret is a little […]
Tag: Epiphone
Epiphone Setup
A good-looking guitar. Nothing much wrong with it, just needs a few slight adjustments to get the setup right. Before doing anything else I took the old strings off and gave the fret-board a good clean. With the new strings in place I could properly assess the action. Unusually the fret-board was a little flat, nine […]
Epiphone Les Paul – Setup
The first step is to check the amount of curve in the neck. It should bend up slightly and is measured half way along the neck using a notched straight edge and a feeler gauge. The tension in the strings pulls the head up, increasing the curve. This tension is balanced against the truss-rod which […]
Epiphone Les Paul – Fret Dress and Setup
Been a quiet week, with nothing of real interest. A couple of fret-dressings. The last one a rather nice Epiphone Les Paul The fret-dress was a routine job, as was the setup.. The neck, unusually had very little set in it… The owner wants a fairly low action but I think it needs a little more […]
Epiphone Bass – Update
Having got the pickups done it’s time to look at the top end. Fit a new set of machine heads. It should be easy apart from the fact none of the screw holes line up! Firstly then, plug all the old holes. Once the glue is dry trim the wooden pegs and fit the new […]
Epiphone Bass Upgrade
Spent all day today in an update to an Epiphone Bass. New pickups and machine heads. There are a couple of problems to overcome. Firstly the bridge pickup is much bigger than the existing hole, although the old pickup rings are longer so there may be some old holes and marks visible. Second problem, the owner wants […]
Epiphone EJ-200, Lower action height
Rather a nice acoustic, although the owner wasn’t happy with the action height, It was a little high. Unfortunately, as with most acoustics, it isn’t adjustable. The only solution is to physically reduce the height of the bridge. Grinding down the bridge. The Neck also had a little to much of a curve as well […]