I’ve got a few pre-shaped bone nuts but, alas, none that would fit. The only other blanks I’ve got are a little large and will therefore need a little more work to make one fit. Once I’ve cut it roughly down to size (I’ll get at least 2 nuts from that blank) I’ll use the sanding disk to […]
Tag: Fender Stratocaster Setup
Fender Stratocaster – Setup
A nice new Stratocaster. Nothing much wrong with it, but the owner just wanted the action lowering and setting up. Starting at the top; the string height over the nut (measured at the 1st fret) was fine. The set in the neck was a rather high (0.023″) so I’ll straighten that out a little. The action height […]