An interesting problem, it came with no bridge saddle. The trouble there is not having a starting point with the setup. However, got to start somewhere, so a bone blank. Cut if first to roughly the right length. It’s also a little thick so it needs sanding down a little… So there’s the staring point. […]
Not the greatest of guitars, but could still play a lot better. It just needs the action height bringing down a little…. Before I take the strings off I like to set the neck relief where it should be, so I can tell exactly how high the bridge is. Now I know exactly how much […]
How does your guitar sound? One simple improvement is to replace the existing nut and saddle with bone ones… I’m a traditionalist and I really like traditional bone nuts and saddles. To make sure I get the size exactly right I need to get the action setup properly first. The neck was a little […]
What if the action on your acoustic is a little high? It can be an easy fix. This one is a little high so I’m going to give it a general setup. Starting with the neck relief. I always start that with the old strings, otherwise I’ll have to take the new ones off and […]
Now there’s a great looking guitar. A real nod the 1960’s. I quite like Vintage guitars, they’re normally quite well made guitars but this one isn’t so good….. It’s got some very uneven frets. To really lift the tone I’m also going to replace the plastic bridge saddle with a bone one. Along with a […]
This needs a little TLC if it’s going to play again. The bridge saddle is badly damaged so I’m going to make a new one. The nut’s broken as well, so that’ll need to be replaced as well. First the nut. From a bone blank. Next the saddle, using the old one as guide. One […]