Telecaster Refurb By Guitar George

Telecaster – Refurb’

This has to be the heaviest Tele’ I’ve ever come across.  It’s big old chunk of pine (I think) and a solid brass pick-guard. It’s got a few intermittent electrical faults, that wiring doesn’t look too good, and I think the outside of the braded cable was shorting against the wiring on the pots’ It’s […]

Martin – Partial Re-Fret

Here’s a nice one.  It’s been well looked after but well used. The frets are rather worn. As ever it’s worse at the paying end. First thing first, out with the nut. and then out with the old frets.  A little heat often helps to loosen things off a little. then in with the end […]

Gretsch – Setup

I do love a big semi-acoustic. For a Chinese made guitar these are excellent value.  This one’s been fiddled around with a little though, so it needs a setup. It’s fairly new so doesn’t really need any cleaning as such, but a splash of lemon oil never goes amiss. A little polish on the top before […]

Custom Stratocaster – Build

I usually enjoy a complete guitar build, something to get my teeth into and turn out something nice.  It helps to work with the customer first mind you, to make sure I get bits that work together.  The trouble with cheaper parts, from various places it can be a bit of a challenge! At first […]

Fender Precision Bass – Setup

I often get asked if I can set up a Bass guitar.  The simple answer is yes, there’s no real difference. Some of the numbers may be a little different but the principles are exactly the same.  It’s the same 5 point setup…. No.1  The neck relief. By adjusting the truss-rod. No.2  The action at […]

Burns Steer – Setup

What a great looking guitar.  I’ve never really liked Burns guitars but this one’s rather lovely. It’s an odd sort of thing, It’s got a sound hole, but there really isn’t any sound coming out of it? Some of the frets are a little worn…. and just a little uneven. A fret dress will sort out […]

Dean – EMG Pickup upgrade

Not quite my cup of tea but a nicely built guitar. The owner has decided on a pickup upgrade so it should be a fairly simple job. Off with the control knobs. It’s all plug in so shouldn’t need any soldering, apart from the cable for the neck pickup, just not long enough so I spliced […]