Tanglewood – Lowered action

What if the action on your acoustic is a little high?  It can be an easy fix. This one is a little high so I’m going to give it a general setup. Starting with the neck relief.  I always start that with the old strings, otherwise I’ll have to take the new ones off and […]

Larrivee – Low action

Does your guitar buzz playing open chords? at the top of the neck?  It’s probably because the slots in the nut are too low.  The proper answer is to replace the nut but a quick fix can be achieved…. It’s got a nice bone nut, but the action is way too low.  As I say, […]

Fender Showmaster – Fret-dress and setup

What  beautiful piece of wood.  Sadly it’s a little worn and actually wasn’t very well built in the first place, but I can sort all that out… As I say, some of the frets up at the paying end are rather worn. Some of the frets are way off.  I’m not sure I’ve ever seen a […]

Martin GPCPA4 – ToneWoodAmp

This Martin needs a little bit of work, the action is rather high.  That’s easily fixed but I was amazed by the box of magic that the owner also wanted to add. The action was very high, a pity on such a nice guitar. Before taking the saddle down it’s important to make sure the neck […]

Custom built Telecaster

I like a project I can get my teeth into. Got handed a box of bits to put together.  Some very nice parts there as well. First thing then, does the neck fit the body?  Not quite. The neck pocket just need teasing out a little.  Nothing much, but I don’t want to force it. The heads […]

Epiphone Casino – Rebuild

What a lovely guitar.  It’s seen some action though, so needs a little bit of work.  The owner’s decided rather than just a little TLC he want’s to go the whole hog and have some serious upgrades along the way as well… The pickups are already out, the covers are away being re-chromed. It’s missing a strap button […]

Eternal Guitar – Sticky Switch

I don’t often get calls emergency calls, but I’m always willing to help gigging musicians if I possibly can.  I got a call on Friday from a tech’ needing a little help.  Got a guitar with a sticky switch and not enough time to strip it down and change it. As it goes it was a fairly simple […]

The Ventures

Now here’s a good looking guitar, I rather like it. As with lots of these Korean guitars, it’s not terribly well built.  I’ve seen a lot worse, and I’m sure it can be sorted out. The trem’ is a little high and the owner want’s it blocked to only go down.  That’ll make sure it returns to […]

Tanglewood – Sharp Fret Ends

This is a nice guitar, it just has a couple of problems. The biggest problem are the fret ends they’re a little sharp. A minor problem, the jack socket is a little loose. It’s fiddly but the nut on the inside had come loose so it was sticking too far through. It’s that one there.  […]