When I started this thing I had no idea just how long it would take! however It’s done.. To see this guitar build from the start click here.
Tag: Spanish Guitar
Custom Built Spanish – 8th update
Its finally getting close! almost done… Today I put the frets in and levelled the edges.Although I’ve got the length right and a 45° angle on the edge they still need a little bit of work to remove the sharp edges.Might even be finished soon… Keep watching, to see it from the beginning click here. […]
Custom Built Spanish 6th update
As it was a little quiet last week I did a little more on the Spanish. I’ve put some fret markers on the side of the fretboard. Using the pillar drill to drill the holes. The markers come as a long thin plastic rod. Glue the end into the holes… and cut it just slightly […]
Custom Built Spanish 5th Update
I don’t seem to get much time to work on this one, but it’s been a little quiet this week so I’ve finished off the bridge. The 2 white strips are bone so that the strings don’t cut into the wood when they are tied on. I’ve still got to cut the saddle for the […]
Custom Built Spanish 4th update
After a busy week I had a fairly quiet weekend. I had a little bit of a rub around the Spanish Acoustic I’ve been building for the last 18 months or so. It occurred to me that I hadn’t published any pictures for ages and its come on a long way. The neck was just […]
Custom Built Spanish – 1st update
Had a little spare time this week so I’ve done a little more on the Spanish. I’ve got the fret-board levelled and fret slots cut.
Custom build Spanish
Since its been a little quiet I’ve been able to turn my attention to and on-going long-term project, a custom build Spanish Acoustic. So far I’m probably about half way to getting the neck finished…Keep watching and I’ll let you know how it goes. Next I levelled the fretboard and cut the fret slots. The neck and fingerboard […]