I like a project I can get my teeth into. Got handed a box of bits to put together. Some very nice parts there as well. First thing then, does the neck fit the body? Not quite. The neck pocket just need teasing out a little. Nothing much, but I don’t want to force it. The heads […]
Wow, an interesting mix of old and new. The neck is genuine Fender, but I don’t know about the rest. The body’s probably the heaviest Telecaster I’ve ever come across. I’m going to fit the neck to a new body with a mix of old and new hardware. The first stage is to sort out the […]
I’ve just been given a mixed bag of bits, some old some new, to put together…. I think there’s a very nice Telecaster in there somewhere! But where to start?How about at the top, the machine heads. First the guides.. they’re rather tight so rather than hammer them in and risk damaging them I pressed them […]
The owner wanted to build the electrics himself so I’ve just got it back to complete the setup…. Looks good so far…First thing first, the neck set…It’s just a little high so I’ll need to tweek the truss-rod. Unfortunately the screw is on the bottom of the neck so I’ll have to take off the scratchplate. […]
Re-shaping the frets isn’t difficult, it just takes time and patience along with the right file.. Making sure only to file the edges of the fret and round it off without touching the top. Half way through fret No.1… Some time later, all done…. The file leaves a very rough finish so each fret now needs re-polishing […]