Odd one this, I’ve been asked to fit a new neck to an old guitar but never fit a new body to an old neck? I was a little sceptical at first, it was a nice guitar to start with, and I wasn’t very sure about that pink? Some of the hardware is going to be […]
I like a project I can get my teeth into. Got handed a box of bits to put together. Some very nice parts there as well. First thing then, does the neck fit the body? Not quite. The neck pocket just need teasing out a little. Nothing much, but I don’t want to force it. The heads […]
What a lovely piece of wood, a really great looking guitar. It’s got a couple of problems, mostly just setup, but the neck isn’t on straight either. Since the truss-rod adjustment is on the heel of the neck I’ll have to take it off anyway. I don’t need to measure that with a feeler gauge, […]
Why should a brand new guitar like this need a setup. Simple answer, it shouldn’t. However it’s been built a long way away, in a Californian desert, and travelled half way round the world. How many temperature and humidity changes has it been through? It’s not really that bad, just needs a twist here and […]
Had a lovely Tele’ on the bench this week, a 52 Re-Issue. Nothing really wrong with it, just needed a setup to get it playing right… The trouble with these guitars is the truss-rod adjustment, it’s on the bottom of the neck. You could make the adjustment by loosening the strings and the neck, give […]
I’ve just been given a mixed bag of bits, some old some new, to put together…. I think there’s a very nice Telecaster in there somewhere! But where to start?How about at the top, the machine heads. First the guides.. they’re rather tight so rather than hammer them in and risk damaging them I pressed them […]
A quiet day in the workshop today, a couple of odd bits and bobs. Did have a rather nice Tele’ in need of a setup. Nothing really wrong with it, just needs a tweek here and there. The neck set was a little high, so about a 1/4 turn on the truss-rod. The action at […]