US Stratocaster – How low is your action!

I’m often asked for a low action, but this is probably the lowest I’ve ever seen! Actually someone’s had a go at it and the owner wants me to put it right.  I like a low action myself but this is un-playable.The tremolo is also sitting flat and locked in place… It didn’t really take a […]

#Eastman Semi-Acoustic setup

  A nice new guitar, not far off just needs a little tweek here and there, particularly as the owner wants flat-wounds on it. As ever with the new strings fitted first I adjusted the truss-rod to get the right set in the neck… Next the action height at the 12th fret…The bridge just needed […]

EKO Saddle

These are tough old guitars, you don’t find any more solidly built.  The saddle on this one seems to have melted! I don’t know how but ‘m going to fit a new bone one. It took a bit of work to get the old saddle out, in pieces in the end. Not that it matters, […]

Duesenberg 49er – Fret dress and setup

I think this is a great guitar, well it could, and will be.  Sadly they’ve let themselves down with the detail.  Nothing that can’t be fixed, but it’s something that shouldn’t need doing. While I’m at it I’ll tidy up a couple of other problems.  It’s seen some action so the frets are a little […]

Faith Setup

A nice acoustic.  Plays nicely but could be better. Unusually the set in the neck was very low, “off the peg guitars” tends to be the other way, too much of a curve.  My feeler-gauges are even too slim to even measure it…Slackening the truss-rod a little easily sorted that out… That’s better.The action at the 1st […]

Custom Built Spanish – 9th update

Although I’ve got several jobs in the queue they are all waiting for parts.  So I though I’d have a bash at the old Spanish. I did hope I wouldn’t have to do this, but the frets weren’t as even as I hoped and I scratched the tops of some while getting the ends sorted.  Since […]

Taylor T5

Is this the most flexible Guitar out there?  Could well be.  There was a slight holdup with the T5 I ordered at the #Taylor Roadshow, but finally got my hands on it this week.  Thanks again to the Musicroom Lincoln for sorting that little one out. I don’t have a acoustic amp to make the most of it, but […]

Custom Built Spanish – 8th update

Its finally getting close! almost done… Today I put the frets in and levelled the edges.Although I’ve got the length right and a 45° angle on the edge they still need a little bit of work to remove the sharp edges.Might even be finished soon… Keep watching, to see it from the beginning click here. […]