I had a little spare time this afternoon so had a bit of a play with the old Rapier. As I’ve not been able to find the proper bridge I decided to fit a “Tuneomatic” one. First thing I need to work out exactly where it’s going to fit so I needed to establish the […]
Category: General
Encore Strat Setup
This became more of a referb’ than just a setup. A bit of a mess to be honest, a prime example of what can go wrong if you don’t really know what you are doing. The guitar was also rather grubby so the first thing it will need is a good cleanup. At some point […]
Music Room Lincoln
Guitar Surgery Something new, if you want something doing, but are not too sure about it, come in for a chat. I will be available in the Music Room Lincoln between about 10am and 1pm on Sat 25th May for free consultations. If it’s something minor that I can fix on the spot, such as changing a set […]
Web site update
I have just completed a “Testimonials” page on the web site – read the comments here. Thanks to those people who have left such comments about my work.
Gibson Explorer – Service and Setup
A fairly routine job, fit a new set of strings and check the setup. I found a few other bits and pieces that also needed putting right along the way. I’ve never really been a fan of these sort of guitars, one of the inevitable problems is you always end up bashing the ends on […]
Epiphone Emperor – 4th and final Update
Having got all the electrics fitted and working its now time to fit the new tailpiece and strings. Since I tidied up the top of the bridge earlier I also needed to re-cut some string slots in it. Firstly I fitted the 2 “E” strings to correctly place the floating bridge… Using the appropriate file I cut slots in the […]
Custom Built Spanish – 2nd Update
I’ve actually done quite a bit more, I’ve just been too busy to update the blog. The neck and fingerboard are just about done. They’ll need a final bit of sanding and final treating but the shape is there. The top is coming along, I’ve got it to the right thickness and have the sound-hole cut. […]
Les Paul rebuild
A bit of a bag of nails, this one is going to need quite a bit of attention. The fingerboard is filthy and the frets are badly worn. Neither of the pickups are even connected so a complete re-wire is needed. First job, get the guitar on the jig, dress the frets and clean the […]
1960’s Watkins Rapier – 5th update
Now that the neck is finished its time to re-fix it back on the body. Since I’ve filled in the screw holes in the neck I need to make sure the new ones are in the right place. The neck pocket is also a little tired and therefore a bit of a sloppy fit I used […]
Epiphone Emperor – 1st Update
Made a start, pulled out all the old electrics…. By using a piece of cotton I marked exactly where the strings will sit once the new tailpeace is fitted. From that I’ve worked out an exact centreline so I can correctly locate the pickup rings. I can now work out exactly where the holes need to […]