Got the wiring finished so all the bits and pieces back in place. Just one part missing, needed re-chroming which I really can’t do! Once that comes back all it’ll need is a new set of strings. To see the start of the project click here.
Category: Improvements
Gibson Flying V – 4th Update
Got the wiring done. A simple guitar, 2 pickups, 2 volumes, one tone, one switch and a jack socket. Nothing particularly fancy although I’ve been asked to include the volume tone fade fix. To see the entire project so far click here.
Gibson Les Paul, Fret Dress & Setup
I was asked to have a look at a Les Paul with a view to improving the setup, a nice easy couple of hour job, (or so I thought)! The first thing of course is to have a close look to see exactly what needs doing to improve the playing. If the owner was completely […]
Gibson Flying V – 3rd update
Now that the glue has dried I can refit the pickups to drill the new holes. I’ve used cotton in place of the E-strings to make sure the location is right. Holes drilled and pickups installed. I’ve left a slight gap between the bridge pickup and the pickguard otherwise the hole for pickup would be visible […]
Gibson Flying V – 2nd update
I’ve started to fit the new parts but found another problem The pickups have been changed at some point and the holes for the pickup rings aren’t quite in the right place and they don’t quite sit squarely. The neck pickup isn’t too bad but the bridge pickup will have to be moved. I’ve filled […]
Gibson Flying V – 1st update
Having sorted out the sheered off strap button screws etc. Next I removed all the old bits and pieces, pickguard with electrics before giving the body a good polish to remove all the old dirt and minor scratches. Ready to start building in the new parts. Click here to see the start of the job.
Music Room Lincoln
Guitar Surgery Something new, if you want something doing, but are not too sure about it, come in for a chat. I will be available in the Music Room Lincoln between about 10am and 1pm on Sat 25th May for free consultations. If it’s something minor that I can fix on the spot, such as changing a set […]
Epiphone Emperor – 4th and final Update
Having got all the electrics fitted and working its now time to fit the new tailpiece and strings. Since I tidied up the top of the bridge earlier I also needed to re-cut some string slots in it. Firstly I fitted the 2 “E” strings to correctly place the floating bridge… Using the appropriate file I cut slots in the […]
Emperor Epiphone – 3rd Update
Now that the old holes are filled and a centre line accurately established its time to work out exactly where the holes for the new pickup rings should be. Using tape to protect the guitar top and some more tape to keep everything in place very gently drill the new holes. To make sure to top […]
Epiphone Emperor – 2nd Update
There isn’t much wrong with this one so all I’ve done today is give the fingerboard and frets a bit of a clean and oil. Changed the machine heads for some nice Gold ones To follow the project click here. To see where this guitar started click here.