I’ve often said that any guitar can be improved by fitting a Bigsby. I guess that’s not exactly true, but how about this one! Fitting it isn’t difficult, it’s only 4 screws after all. As ever the devil is in the detail though! I’m figuring about there…. Just far enough down to cover up the witness mark […]
Back to that 335 again, still not playing right. I thought it might need a little more TLC. I’ve worked out where the problem is at least. The G-string is sticking in the nut! Should be an easy fix, put in a bone .onet… Here’s the old on still in placeSoon tap that out and […]
These are very reasonable alternatives to their more expensive Gibson cousins. Someone’s fitted some really cheap machine heads though, so it needs tidying up and some new heads fitting. The old ones…With them all off it looks like it’s had a dose of woodworm!Before fitting the new heads I drilled out some of the old […]
What a lovely Guitar, just in need of a tweek here and there to get it playing as it should. The frets were good and even so they didn’t need any work for once. Since it’s got a floating bridge I put some low adhesive tape on the body before removing the strings. That way […]
A nice one this, just needs a little TLC.. Nothing much wrong with it really, just needed a little bit of a clean and oil.. followed by a standard 5 point setup.. 1. The neck set… A little high so a turn on the truss-rod… 2. The action at the 12th fret… a little high […]
Want better tone from your guitar? Even with good quality pickups you can loose signal through the tone circuits. Set to 10 there is still some signal going through the variable resistor and capacitor. There is a solution, variable resistors that go to open circuit when at max, thereby disconnecting the tone circuit completely. This is a Stratocaster I upgraded recently. These […]
A simple way to improve the way your guitar sounds, new pickups… The wiring is actually very simple..What’s not so simple is setting them up afterwards, it’s a bit of an art to get the sounds balanced. With this one I found the two pickups worked better with the neck pickup flipped round.Looking and sounding […]
A recovery of something just about fit for the bin. A bit of a mess really, but I thought I’d see what I could come up with…. Before: in need of quite a lot of work… The fretboard was coming off so I helped it along it’s way. Next I drilled out the old fret […]
I Love these guitars. Their Quality control isn’t great, but there’s nothing that can’t be fixed. A bone nut will help the sustain and keep it in tune… I’m going to use a large blank….This one is already nice and square which saves a little work.It’s a little thick mind you, so I’ll need to […]
A nice little guitar. The trouble is they’re built to a budged, seemingly without much care. However I’m going to make this one play really nicely. While I’m at it I’ve been asked to fit a TUSQ nut. Not something I like to be honest, but I’ll stick it on and see how it works. […]