Here’s a rather nice Stratocaster, just needed a bit of a tweek on the setup. It’s got some nice pickups as well. Although for an American made Strat they got some basics wrong, the neck is on a little wonky. Since the neck will come off to adjust the truss-rod I’ll sort that out when […]
Tag: Electric Guitar Nut
Vintage SG – New nut, setup and service
Some of these “Vintage” guitars can be quite good. For some reason the nut slots on this one have been cut rather deep and the open strings are buzzing a little. There are quick fixes but the proper thing to do is to replace the nut. Gently out with the old one. The new bone […]
Gibson ES335 – Bone Nut
Back to that 335 again, still not playing right. I thought it might need a little more TLC. I’ve worked out where the problem is at least. The G-string is sticking in the nut! Should be an easy fix, put in a bone .onet… Here’s the old on still in placeSoon tap that out and […]
Bone Nut
This one rather sits at the bottom end of the market, but even so, it should play OK. This one had a very strange “buzzing” sound. It’s all down to the cheap plastic nut with its overly slack slots. The only way to cure that is to fit a decent nut.The blank was just a […]
Burns Marquee – Fret Dress and Setup
A lovely guitar, just not quite as good as you would hope… The nut slots have been widened out and then repaired, rather badly. The only real way to fix that is to replace the nut. Some of the frets are a little un-even, so I’m going to dress them to get a common level. […]
Dean Dime – Service and setup
One for the Metal fans, not quite my cup of tea but still deserves the same time and attention as anything else. Nothing badly wrong with it mind you, just needs a nip here and a tuck there… The action at the 1st fret was a little high to start with. Trouble is, with a […]
Fender Stratocaster – Custom build
A collection of bits and pieces, put together should make a nice guitar… To make it a really great guitar, rather than just an average one I levelled the frets. Firstly making sure the neck is level.With it nice and flat, grind down the fret tops to a common level….Once levelled each fret needs to […]
Richie Sambora Stratocaster
Nice guitar but It’s got some problems. Probably been there from new, but now I’m going to put it all right… The first problem is the Intonation. No matter what the owner did it just didn’t sound right all the way up and down the neck.Looking at the nut the slot for the bass E […]
Jackson Custom-build
A recovery of something just about fit for the bin. A bit of a mess really, but I thought I’d see what I could come up with…. Before: in need of quite a lot of work… The fretboard was coming off so I helped it along it’s way. Next I drilled out the old fret […]
Gibson ES 335 – Bone Nut
I Love these guitars. Their Quality control isn’t great, but there’s nothing that can’t be fixed. A bone nut will help the sustain and keep it in tune… I’m going to use a large blank….This one is already nice and square which saves a little work.It’s a little thick mind you, so I’ll need to […]