If you need a new bone nut, but want a black one, how about Water Buffalo Horn? It’s not quite as tough as bone but it’s the best natural substance I’ve come across. This Bass needs a new one just because it’s broken. I’ve not got any pre-shaped ones so I’m going to have to […]
Tag: Electric Guitar Repair
Fender Stratocaster – Build
Putting a guitar together may seem easy but the devil is in the detail! Despite what it says I suspect this neck isn’t genuine Fender, if it is, it’s a Friday afternoon special, the frets are all over the place. If It’s to play nicely they’ll need levelling first. The masking tape is to protect […]
Gibson Les Paul – Fret Dress and setup
Wow, what a great guitar. And a fantastic example of a great guitar at that! It’s seen some action though, and needs a little TLC to bring it back to life. The frets are a little worn up at the paying end so that’ll need sorting out for a start. In preparation for a fret dress, off with […]
Gretsch – Bone nut
I love these, some great guitars coming out Gretsch these days. Great value an very well made. This one just has a slight problem, staying in tune. It’s probably the nut. I’m not much a fan of these new fanged materials, I don’t think you can beat good old fashioned bone. Unfortunately I can’t find […]
Eastcoast – clean and setup
Not a bad little one this, I’m not sure about the colour of the neck, I don’t think I’ve seen such an orange finish before! All it needs is good clean and setup though. All it needs is a little time to pull each part out and clean it thoroughly. Not forgetting the frertboard… That […]
Vintage SG – New nut, setup and service
Some of these “Vintage” guitars can be quite good. For some reason the nut slots on this one have been cut rather deep and the open strings are buzzing a little. There are quick fixes but the proper thing to do is to replace the nut. Gently out with the old one. The new bone […]
1956/58 Stratocaster Re-Build
Here’s another interesting project. Another mixture of old and new. A good friend of mine, Russell, has been colleting some fine old parts and has decided it’s time to put it all together…. Some of these parts are older than I am, a 1958 neck and 1956/58 pickups, tremolo, neck and back plates etc. all in fantastic condition. The […]
Stratocaster – New neck
Here’s a bit of an oddball. This guy’s just got hold of a great guitar, the only trouble is it’s got no neck! Yeh, it’s a complicated story, but I’ve sorted out a new one which should do nicely… The profile is really nice and it’s got a great finish too. The only trouble is it’s got […]
Vintage Metal XX – Setup
I’ve never been a fan of this sort of thing, and Vintage Guitars are not the best, but this one worked out quite well. There are a couple of bits missing, but they should be easy to find… The trem’ was a little gummed up, so I stripped it all down to clean each part. […]
Fender Stratocaster – New Pickup
Fancy and upgrade? How about a new pickup or 2? Not too sure about fitting them yourself? Just give me a shout… Just one to change in this case, the bridge pickup. It’s also a question of the quality of wire, I don’t use the cheap stuff. Decent wire not only lasts longer, will maximize the […]