Should be a simple job, a crackly Strat’. Always an annoying problem but sometimes difficult to locate. At first I couldn’t really see (or hear) anything wrong, but that’s not really the answer so I opened it up to see what’s inside. The strings are a little worn and there’s always the chance of snapping one, […]
Tag: Electric Guitar Wiring
1960s Watkins Rapier – 6th update
I had a little spare time this afternoon so had a bit of a play with the old Rapier. As I’ve not been able to find the proper bridge I decided to fit a “Tuneomatic” one. First thing I need to work out exactly where it’s going to fit so I needed to establish the […]
Encore Strat Setup
This became more of a referb’ than just a setup. A bit of a mess to be honest, a prime example of what can go wrong if you don’t really know what you are doing. The guitar was also rather grubby so the first thing it will need is a good cleanup. At some point […]
Les Paul rebuild
A bit of a bag of nails, this one is going to need quite a bit of attention. The fingerboard is filthy and the frets are badly worn. Neither of the pickups are even connected so a complete re-wire is needed. First job, get the guitar on the jig, dress the frets and clean the […]
Emperor Epiphone – 3rd Update
Now that the old holes are filled and a centre line accurately established its time to work out exactly where the holes for the new pickup rings should be. Using tape to protect the guitar top and some more tape to keep everything in place very gently drill the new holes. To make sure to top […]
Epiphone Emperor – 1st Update
Made a start, pulled out all the old electrics…. By using a piece of cotton I marked exactly where the strings will sit once the new tailpeace is fitted. From that I’ve worked out an exact centreline so I can correctly locate the pickup rings. I can now work out exactly where the holes need to […]