A fairly routine job. Take a standard Squire Stratocaster and those special touches which will make it so much better. The biggest setback to a really good playing action are the slightly uneven frets. They are a little worn as well so a fret dress will sort out both problems. The other problem lies in the machine heads. […]
Tag: Electric
Very Green Ibanez!
Quite a long job this one, been on the go for a couple of weeks. The customer wanted a really nice setup, which really ment a fret dress before he had the body re-painted. I though it was a bit daft to do the setup twice so ended up pulling it apart and doing the […]
Squire Strat with new Tele Neck – Update
Had a spare slot this week so managed to finish off the Strat’. What a job, I like a challenge sometimes but not like this one… Not only were the frets very uneven but the truss-rod is stuck solid. There is a slight back-bow without the strings so I bolted it on the jig to […]
Epiphone Les Paul – Fret Dress and Setup
Been a quiet week, with nothing of real interest. A couple of fret-dressings. The last one a rather nice Epiphone Les Paul The fret-dress was a routine job, as was the setup.. The neck, unusually had very little set in it… The owner wants a fairly low action but I think it needs a little more […]
US Fender Stratocaster – Re-Fret 2nd Update
I’ve got a few pre-shaped bone nuts but, alas, none that would fit. The only other blanks I’ve got are a little large and will therefore need a little more work to make one fit. Once I’ve cut it roughly down to size (I’ll get at least 2 nuts from that blank) I’ll use the sanding disk to […]
Fender Stratocaster – Setup
A nice new Stratocaster. Nothing much wrong with it, but the owner just wanted the action lowering and setting up. Starting at the top; the string height over the nut (measured at the 1st fret) was fine. The set in the neck was a rather high (0.023″) so I’ll straighten that out a little. The action height […]
Telecaster Build – 1st Update
Had a go at the Telecaster today. The first step of course is to fit the neck to the body. Not quite as easy as I would have liked as the neck pocket was just too small for the neck. However with a coupe of hours work and some very sharp chisels and it’s in. Since […]