I often get asked if I can set up a Bass guitar. The simple answer is yes, there’s no real difference. Some of the numbers may be a little different but the principles are exactly the same. It’s the same 5 point setup…. No.1 The neck relief. By adjusting the truss-rod. No.2 The action at […]
Tag: Fender Bass
Fender Jazz Bass – Setup
What’s in a Bass setup? Much the same as a guitar really, just slightly different settings to allow for the heavier strings… The neck had a little too much set, or curve…. so a tweek of the truss-rod. With the neck flattened out a little it did bring the action at the 12th fret down […]
Fender Precision Bass – Setup
A great looking guitar, just not playing at all well. I didn’t really need to measure the action, more like a step-ladder to reach it! Yeh, that’s possibly the highest action I’ve ever seen, even on a Bass. The bridge saddles were quite low though, and those pickups are rather close to the strings. While […]
Fender Precision Bass – Setup
Another stunning new Fender, just needs a tweek here and there to get it playing at its best. While I was at it I tidied up some of the plastic film left on the pick-guard.. The only way to get it all is to take the knobs off. On with the setup the neck […]
Fender Jazz Bass nut job
This one had a bit of a buzz so I made a new nut… Unfortunately I couldn’t find a black TUSQ blank the right size so I’ll have to cut down a larger one to fit. Mind you the original blank was the wrong one anyway. The radius of the bottom didn’t fit the neck! […]