The first thing I did was to have a good look at the Guitar. Since the owner wants a low action the question is how accurately are the frets set, any high frets will cause buzzing when the action is lowered. I’m pleased to say it’s pretty good so I won’t need any work […]
Tag: Fender Telecaster
Telecaster Custom – Volume fix
I’ve never really been a fan of these but to see a 70s guitar like this is nice. The owner wasn’t happy as the bridge pickup was just too much when on 10. I’ve never really come across such a request but he was right, it just had too much of an edge to it, […]
Telecaster Build – Final Update
Got the Tele finished this afternoon. Not before the neck caused me more grief. Next stage, wire in the electrics. A slightly unconventional wiring with a 4 position switch so that the pickups can be selected singly, in parallel or series. Once the wiring was done It’s the final lap, put the strings back and […]
Telecaster Build – 3rd Update
Added most of the hardware today, even that proved more difficult than I thought. Since the pick-guard is of a very early design there are no holes for the neck pickup screws. I’ve mounted the pickup on two springs with screws directly into the body. Since the pick-guard has to fit over the pickup but under the […]
Telecaster Build – 2nd Update
Carrying on with the Telecaster I’ve come upon a problem. Its caused by the fact that the neck is second-hand. It doesn’t sit entirely square so over the length of the strings the bridge will be out by about 3mm. That leaves 2 choices: A. Line up the pickup mount with the bridge which will require […]
Telecaster Build – 1st Update
Had a go at the Telecaster today. The first step of course is to fit the neck to the body. Not quite as easy as I would have liked as the neck pocket was just too small for the neck. However with a coupe of hours work and some very sharp chisels and it’s in. Since […]
Telecaster Build
I’ve been asked to put together a Telecaster for a customer. He has most of the parts but wants it put together professionally. Most of the parts are new, apart from the neck, it’s from an old favourite guitar so he wants to incorporate it into the new guitar. Its seen some action so the first stage […]
Noisey Telecaster
I was asked if I could fix a noisy Telecaster, I thought that was the idea! However on listening there was an excessive amount of hum. I though it would be less complicated as you can get to the wiring without taking the strings off. However once I got it open I couldn’t immediately find anything […]