There are a lot of after-market pickups out there which can represent a good upgrade. While I was at that with this guitar the owner also wanted me to remove the modern printed circuit board and replace it with traditional potentiometers and capacitors, he felt they would be more reliable in the long run. The […]
Tag: Gibson Guitar Service.
Gibson SG – Bone nut, service and setup
What a beauty, I’m not sure if It’s a little extreme, but it’s got something. It’s not staying in tune very well mind you, but I think I an see why. Here’s why it’s not staying in tune: With the strings pulling out of the slots in the nut at such an angle, they’ll be […]
Gibson Les Paul, Fret-dress and Setup
A nice old guitar but in need of a little TLC… The frets and fretboard are rather worn for one.The bridge pickup is loose, and the pickup switch is rather intermittent.With the strings off the reason for the loose pickup is clear, the brass threaded end has pulled out. A fairly easy fix.The frets are […]
Gibson Les Paul – Overhaul, Final update
With all the parts together now all I have to do is put it all back together. Life is never that simple though, the pointers for the Vol/Tone controls don’t fit the pots’. Not a big problem, I just need to file the hole out a little. With the new pots’ fitted, wire them all […]
Gibson Les Paul – Overhaul, 1st update
Got the frets polished… Next I turned my attention to that broken nut. I used a grinding disk to cut a bone blank to the required size… It’s a fiddley job which I rather hate, the job is easy, it’s just the smell of grinding bone, like working in a slaughter-house! yuk. It needs a […]
Gibson Les Paul – Overhaul
This one is going to take a while, I like a challenge now and then! It’s perhaps going to take longer than I thought but since it’s a quality guitar it shouldn’t be too difficult. The guitar with the new parts… Along with the new parts it also needs a little bit of TLC, the […]
Gibson Les Paul Finished
With the cleanup finished all that’s needed now is to put it all back together and set it up. First then the curve in the neck. It had a little too much of a bend so I tightened the truss rod a little… I had a look at the action at the 1st fret, it’s […]
Gibson Flying V- Final Update
Well got it done at last. I was just waiting for one small part that was being re-chromed, only took 3 months!!! While I was waiting I thought I’d better do something to keep the owner happy so I’ve thrown in a bone nut. Since the guitar has such nice pickups, which should sound great, […]
Les Paul Upgrade – Copleted
Finished the Les Paul this morning. Not much left to do really, just fit the strings and re-tune. Once it was all back together I gave it a quick check-out and adjusted the pickup height. Although they aren’t Gibson pickups I went for Gibson setting which proved to be fine. Job done..
Les Paul Upgrade
Got what might seem to be a strange request. To upgrade a modern Les Paul with old style electrics. The modern Les Pauls have all their electrics built in a modular fashion, which I guess make assembly much quicker and easy. What this guy wanted was very specific, I like it when the customer knows exactly what […]