I think this is a great guitar, well it could, and will be. Sadly they’ve let themselves down with the detail. Nothing that can’t be fixed, but it’s something that shouldn’t need doing. While I’m at it I’ll tidy up a couple of other problems. It’s seen some action so the frets are a little […]
Tag: guitar
Custom Built Spanish – Finaly Complete!!
When I started this thing I had no idea just how long it would take! however It’s done.. To see this guitar build from the start click here.
Musicman Axis – re-fret
A slightly odd request, a re-fret just to change the feel of the guitar. The neck minus the old frets. Put a slight curve into the new fret-wire. and fit it the old slots. That leaves some very rough and sharp ends…. which need to be filled down evenly. After that each fret needs finishing […]
Fender Jazz Bass nut job
This one had a bit of a buzz so I made a new nut… Unfortunately I couldn’t find a black TUSQ blank the right size so I’ll have to cut down a larger one to fit. Mind you the original blank was the wrong one anyway. The radius of the bottom didn’t fit the neck! […]
Broken Jazzmaster Nut
A fairly simple repair although setting up some guitars is a little more difficult… The bottom of the nut blank didn’t quite fit the slot. It’s a 7½” radius rather than the 10″ of the fretboard. While the strings are off it’s always worth giving the fretboard a good clean and oil. Here is the […]
Tremol-No
What a great idea. A real easy way to lock your trem’ in place. It just replaces the claw for the trem’ springs and has a rod that locks into the trem’ block. The thumb wheels can either lock the trem’ or be loosened off to allow the trem’ to move as normal.
A visit from the un-dead?
I had an interesting visitor with an unusual guitar in an even more unusual case. You’ve just got to love this…… Keep watching. I’ve ordered some bits, when they arrive I’ll show you what’s inside!
Custom Built Spanish 5th Update
I don’t seem to get much time to work on this one, but it’s been a little quiet this week so I’ve finished off the bridge. The 2 white strips are bone so that the strings don’t cut into the wood when they are tied on. I’ve still got to cut the saddle for the […]
Hohner Rockwood Re-build
The next big job. I think this one is going to take a while!!! One of those projects where money is in shorter supply than time so it’s going to have to be fitted in around higher priority jobs… Starting with a box of bits… Most of it is there, perhaps a few screws etc. […]
Jim Harley “Rickenfaker”
Something I bought ages ago but never quite had the time to finish off It started out as a £150 second hand Jim Harley… I’d always fancied a Rickenbacker 350 but couldn’t really afford one so I though I could do something with this.? The frets aren’t too badly worn, a little uneven but a […]