Swapping over a fully loaded pickguard should be a fairly easy job. Unfortunately that’s not always the case, particularly with a less popular make and cheaper parts. I had my fingers crossed but from the start it proved to be far more complicated, couldn’t even get the old pickguard off with the neck in place. […]
I’ve got one of these on my wish list, one day! In the meantime I’ve got this one on the bench to upgrade. It’s had the pickups swapped once already, unfortunately that caused a few problems in itself. One of the problems was with the Push-Push pot’ used to coil tap the neck […]
Here’s a beautiful little guitar, just needs a little attention and an upgrade or 2 along the way… The frets are rather worn for a starter…. and it came with a nice pair of Gibson pickups…… To start with, out with the old, the old nut… off with the volume and tone knobs, so I […]
What a lovely guitar. It’s seen some action though, so needs a little bit of work. The owner’s decided rather than just a little TLC he want’s to go the whole hog and have some serious upgrades along the way as well… The pickups are already out, the covers are away being re-chromed. It’s missing a strap button […]
You’d have thought this job would be easy, but if you really want it done properly there’s a little more to it. One of the pickup rings took a knock and broke so needs to be replaced. The trouble is the classic Gibson rings have a flat bottom and aren’t flexible enough to bend around the […]
These are nice. The owner wanted an electric pickup fitted. The usual place for the jack socket is to combine it with the strap button. Unfortunately I don’t think if I extend the hole it’ll be strong enough. So I’m going to use a standard jack socket mounted elsewhere. The pickup is actually a little […]