This is nice, just not quite finished off very well. The top of the bridge isn’t terribly well shaped, it needs a little wood taking off to bring it to a sharper point. the bottom hasn’t been finished off very well either, there’s quite a gap between the ends of the bridge and the body. […]
What a lovely guitar, see you don’t have to spend a fortune to have a really nice guitar! The owner brought this one round with some lovely upgrades from the start. It’s a nice guitar from the start, but I love the ideas this guy had… Before… A couple of cosmetic changes, a black pick-guard, […]
Finally got back to that old Gretsch. Rather fragile, just handling it and bits of the binding are just falling off. The only way to be able to play it, is to strip it all off and replace it. I found some modern binding that just about matches the colour of the old stuff. It’s […]
I Love these guitars. Their Quality control isn’t great, but there’s nothing that can’t be fixed. A bone nut will help the sustain and keep it in tune… I’m going to use a large blank….This one is already nice and square which saves a little work.It’s a little thick mind you, so I’ll need to […]
A nice new guitar, not far off just needs a little tweek here and there, particularly as the owner wants flat-wounds on it. As ever with the new strings fitted first I adjusted the truss-rod to get the right set in the neck… Next the action height at the 12th fret…The bridge just needed […]
A great looking guitar, now plays as good as it looks… There was nothing very wrong with it, just some slightly uneven frets and a rather high action. First mask off the fretboard and body to protect it… and level the fret tops. Once the frets are re-shaped and polished I put the strings back […]
Now and again something really nice comes across the bench. This week it was an old Framus. There was nothing really wrong with it, it just needed a good clean and polish. I don’t know when it was built but I could picture it in the hands of a very young John Lennon….
Having got all the electrics fitted and working its now time to fit the new tailpiece and strings. Since I tidied up the top of the bridge earlier I also needed to re-cut some string slots in it. Firstly I fitted the 2 “E” strings to correctly place the floating bridge… Using the appropriate file I cut slots in the […]
There isn’t much wrong with this one so all I’ve done today is give the fingerboard and frets a bit of a clean and oil. Changed the machine heads for some nice Gold ones To follow the project click here. To see where this guitar started click here.
Made a start, pulled out all the old electrics…. By using a piece of cotton I marked exactly where the strings will sit once the new tailpeace is fitted. From that I’ve worked out an exact centreline so I can correctly locate the pickup rings. I can now work out exactly where the holes need to […]