I was out of the workshop all morning and had another small job to finish so didn’t manage as much as I would have liked. However I made a start on the fret-board. The first, and probably most important step, make sure the fret-board is perfectly flat. With the neck flat I always mask up the fet-board […]
Tag: Telecaster
Telecaster Custom – Rebuild
Got an interesting job lined up. Build a Telecaster Custom. The body, neck and pickups are second-hand but everything else will be new. The frets are rather worn so the first job will be to sort those out. I was out of the workshop all morning and had another small job to finish so didn’t manage […]
Merry Christmas
Merry Christmas to all out there in Guitar-land….. At least I managed to clear the bench for Christmas, so I don’t have any customers banging on my door, needing their instruments back for the holiday. Now I can put my feet up for a rest. Speaking of Christmas though. If any of you should get anything […]
Telecaster Build – 2nd Update
Carrying on with the Telecaster I’ve come upon a problem. Its caused by the fact that the neck is second-hand. It doesn’t sit entirely square so over the length of the strings the bridge will be out by about 3mm. That leaves 2 choices: A. Line up the pickup mount with the bridge which will require […]
Telecaster Build – 1st Update
Had a go at the Telecaster today. The first step of course is to fit the neck to the body. Not quite as easy as I would have liked as the neck pocket was just too small for the neck. However with a coupe of hours work and some very sharp chisels and it’s in. Since […]
Telecaster Build
I’ve been asked to put together a Telecaster for a customer. He has most of the parts but wants it put together professionally. Most of the parts are new, apart from the neck, it’s from an old favourite guitar so he wants to incorporate it into the new guitar. Its seen some action so the first stage […]
Noisey Telecaster
I was asked if I could fix a noisy Telecaster, I thought that was the idea! However on listening there was an excessive amount of hum. I though it would be less complicated as you can get to the wiring without taking the strings off. However once I got it open I couldn’t immediately find anything […]