The last bit of the playing action, the Intonation….
Author: George
Epiphone Setup
What a lovely Guitar, just in need of a tweek here and there to get it playing as it should. The frets were good and even so they didn’t need any work for once. Since it’s got a floating bridge I put some low adhesive tape on the body before removing the strings. That way […]
Guitar Setup stage 3: Action at the 1st fret
Hi folks, how’s that setup coming? Once you’ve got the bridge sorted now it’s time to set the action at the 1st fret, by cutting the slots in the nut…
Bone Nut
This one rather sits at the bottom end of the market, but even so, it should play OK. This one had a very strange “buzzing” sound. It’s all down to the cheap plastic nut with its overly slack slots. The only way to cure that is to fit a decent nut.The blank was just a […]
Guitar Bridge Height Adjustment
Hi Folks, How’s the setup going? Once you’ve got the neck set OK the next step is the action at the bridge. Have a look at this….
Ibanez – Pickup swap and new nut
A fairly simple job, swap the pickups for a pair of “Bare Knuckles” and, while I’m at it, put in a Bone nut. First of all I need to take out all the old wiring. The old pickup was coil tapped but the customer doesn’t want to bother with the new one so I need to […]
Guitar Setup Stage 1: Neck Set
Want to know about Guitar Setup. Keep watching for the first stage of a 5 point setup… The neck set, or curve…
Burns Marquee – Fret Dress and Setup
A lovely guitar, just not quite as good as you would hope… The nut slots have been widened out and then repaired, rather badly. The only real way to fix that is to replace the nut. Some of the frets are a little un-even, so I’m going to dress them to get a common level. […]
Guitar Setup – Tools
So if you saw my last video, what’s in a setup, and feel you want to have a go here are the tools you’re going to need… Alternatively, give me a call…
Epiphone Les Paul – Setup
A nice one this, just needs a little TLC.. Nothing much wrong with it really, just needed a little bit of a clean and oil.. followed by a standard 5 point setup.. 1. The neck set… A little high so a turn on the truss-rod… 2. The action at the 12th fret… a little high […]