A recovery of something just about fit for the bin. A bit of a mess really, but I thought I’d see what I could come up with…. Before: in need of quite a lot of work… The fretboard was coming off so I helped it along it’s way. Next I drilled out the old fret […]
Category: General
Gibson ES 335 – Bone Nut
I Love these guitars. Their Quality control isn’t great, but there’s nothing that can’t be fixed. A bone nut will help the sustain and keep it in tune… I’m going to use a large blank….This one is already nice and square which saves a little work.It’s a little thick mind you, so I’ll need to […]
Rickenbacker 360 – Service and Setup
Anyone who knows me will know I’m a Rickenbacker fan, and this is a fantastic example… Nothing much wrong with it, just needs a bit of a clean and setup with new strings..I’ve always though 12 string heads look too large and cluttered but Rickenbacker got it right. With the strings of I first gave […]
Telecaster Build
I’ve just been given a mixed bag of bits, some old some new, to put together…. I think there’s a very nice Telecaster in there somewhere! But where to start?How about at the top, the machine heads. First the guides.. they’re rather tight so rather than hammer them in and risk damaging them I pressed them […]
Epiphone Les-Paul – Fret dress and Nut
A nice little guitar. The trouble is they’re built to a budged, seemingly without much care. However I’m going to make this one play really nicely. While I’m at it I’ve been asked to fit a TUSQ nut. Not something I like to be honest, but I’ll stick it on and see how it works. […]
Custom Build
An interesting little one, finishing of a project. Most of the hard work has been done, and they’ve made a good job of it, but I’ve been asked for a little help with the last little bit to get it playing properly… The first thing, the wiring. A couple of dry joints just needed sorting out…..With the […]
Freshman – Bone Nut & Saddle
Nice 12 string, just wants a bone nut and saddle to make it into something special. I’ll make the new nut from a large blank since I don’t have one for a 12 string. First of all make sure it’s flat and square…Then shave it down to the right thickness.. Once it fits the slot […]
Fender or Gibson which do you prefer?
Most people stand in one camp or the other, Gibson or Fender, but this one crosses divides. It just came in for a once over, service and setup. A classic Fender? No, from the Gibson stable… Not a great deal wrong with it, just in need of a little TLC… The electrics were a little […]
Tanglewood – Broken heastock
Rather a bad break, with big chunks of wood missing….First thing first, remove the out of place splinters so that the 2 halves knit together and glue the head back on… Using wood filler to replace the missing pieces, a bit of a mess…I’ll never be able to hide the crack on the face of […]
Epiphone Flying-V
I can’t say as I really like these, but a classic nonetheless. This one’s going to get an upgrade with a new pair of pickups…While the pickguard is off, wiring in the new pickups, I also gave the pots and switch a clean…. Also, while the strings were off, I gave the fretboard a good clean…and oil…The new […]