Stratocaster – New neck

Here’s a bit of an oddball.  This guy’s just got hold of a great guitar, the only trouble is it’s got no neck!  Yeh, it’s a complicated story, but I’ve sorted out a new one which should do nicely… The profile is really nice and it’s got a great finish too.  The only trouble is it’s got […]

Vintage Metal XX – Setup

I’ve never been a fan of this sort of thing, and Vintage Guitars are not the best, but this one worked out quite well. There are a couple of bits missing, but they should be easy to find… The trem’ was a little gummed up, so I stripped it all down to clean each part. […]

Fender Stratocaster – New Pickup

Fancy and upgrade?  How about a new pickup or 2?  Not too sure about fitting them yourself?  Just give me a shout… Just one to change in this case, the bridge pickup. It’s also a question of the quality of wire, I don’t use the cheap stuff.  Decent wire not only lasts longer, will maximize the […]

Telecaster – Bone nut and setup

What a fantastic looking guitar.  Got to love a Tele’, but a Tele with a Bigsby, even better! That black and white finish look just great. There’s some problems with the bridge though.  It’s sitting rather low, I’m not sure if it’s able to rock backwards and forwards properly?  The trouble is, if I raise it […]

Fender Stratocaster – Cleanup

Here’s a classic looking Strat,  Just needs a bit of a clean, I think had a bit of damp at it. Nothing too bad, but that’s what I got off the face of the fretboard. The frets themselves were also a little corroded.. so gently polish them with steel wool It’s difficult to clean the […]

PRS – Rebuild

A bit of a mess this one, but with a bit of effort I think it should be recoverable.. The first fault is rather obvious, it’s just between the nut and the machine heads! To glue it back together was quite simple, the break was along the grain. The trouble is there were some large pieces […]

Telecaster rebuild

Wow, an interesting mix of old and new.  The neck is genuine Fender, but I don’t know about the rest.  The body’s probably the heaviest Telecaster I’ve ever come across. I’m going to fit the neck to a new body with a mix of old and new hardware. The first stage is to sort out the […]

Gibson SG – Fret Dress and setup

I rather fancy one of these, This one needed quite a bit of sorting out though… The string break angle over the bridge looks a little extreme to me, but I can sort that out when I get it back together and complete the setup. The frets have got some worn spots…. and are a […]

Unknown Bass – re-wire

I’ve never been sure exactly what this is, it’s a bitsa’ (bitsa’ this and bitsa’ that)  It’s not been working properly lately, the electrics have been playing up so I’m going to replace the pots’ and possibly the switch. just a direct swap, one for one. While I’m at it, I drilled out and plugged […]

Ibanez – Setup

Here’s a lovely guitar, just not behaving properly, needs a little work. The first thing is the bridge. The trouble with the wooden bridge is that intonation is always a bit of a compromise. The “Tune-o-matic” option means each string can be adjusted separately.  Since it’s a floating bridge the tape is there just so […]