Wow, an interesting mix of old and new. The neck is genuine Fender, but I don’t know about the rest. The body’s probably the heaviest Telecaster I’ve ever come across. I’m going to fit the neck to a new body with a mix of old and new hardware. The first stage is to sort out the […]
Tag: Electric Guitar Setup
Gibson SG – Fret Dress and setup
I rather fancy one of these, This one needed quite a bit of sorting out though… The string break angle over the bridge looks a little extreme to me, but I can sort that out when I get it back together and complete the setup. The frets have got some worn spots…. and are a […]
Unknown Bass – re-wire
I’ve never been sure exactly what this is, it’s a bitsa’ (bitsa’ this and bitsa’ that) It’s not been working properly lately, the electrics have been playing up so I’m going to replace the pots’ and possibly the switch. just a direct swap, one for one. While I’m at it, I drilled out and plugged […]
Innes Sibun “Strat”
What a beautiful guitar. There are lots of Strats’ out there so it takes something out of the ordinary to stand out, and this certainly does that. It’s got just one slight flaw, some of the frets are just a little un-even. I’ve seen worse, but to get it playing really nicely they need to […]
Ibanez – Setup
Here’s a lovely guitar, just not behaving properly, needs a little work. The first thing is the bridge. The trouble with the wooden bridge is that intonation is always a bit of a compromise. The “Tune-o-matic” option means each string can be adjusted separately. Since it’s a floating bridge the tape is there just so […]
Schecter – Fret Dress and setup
Not quite my cup of tea, and it’s got a bit of a problem, a couple of low spots. High spots are easy, to lower two high frets down to the rest is quite easy but I’ve got to bring the other 22 down to the low 2, if you follow my drift! With the […]
Washburn – Fret dress and setup
A rather lovely guitar, in need of a little bit of work to get it playing properly though. A lovely piece of wood. Some of the frets are rather uneven. Big fat frets with some very low points, so it’s going to be quite a bit of work. There’s quite a bit of wear and tear […]
Squire Start’ – Custom Pickups
Here’s a great way to improve our guitar. Rather than trade it in for an upgrade how about changing the pickups? These should sound good. About the only bits that I’m going to keep are the volume pot and the pickup switch. That’s the new wiring. I’ve added push/push pots on each of the tone […]
Epiphone Les-Paul – Custom re-wire, bone nut and setup
Here’s a very attractive guitar, lovely piece of wood. Had a couple of requests with this one, both easy to sort but one a little more unusual. The owner would prefer just one set of volume and tone controls, rather than a set for each pickup? It’s got standard wiring so it’s an easy enough job, just re-arranging […]
Gretsch Country Gentleman – Neck binding
Finally got back to that old Gretsch. Rather fragile, just handling it and bits of the binding are just falling off. The only way to be able to play it, is to strip it all off and replace it. I found some modern binding that just about matches the colour of the old stuff. It’s […]