A nice old guitar but in need of a little TLC… The frets and fretboard are rather worn for one.The bridge pickup is loose, and the pickup switch is rather intermittent.With the strings off the reason for the loose pickup is clear, the brass threaded end has pulled out. A fairly easy fix.The frets are […]
Tag: Electric
How to tell a good guitar from a bad one!
I’m often asked if such and such a guitar is any good? Is a ***** better than a *****? The truth is they can all vary. It’s possible to pick up a cheap guitar for less than £100 that plays nicely, on the other had you can spend £3,000 on a top end guitar that […]
Flying V – new nut and setup
I’ve never really been a fan of “Flying Vs” but this one came out quite nicely… The first thing to fix is the nut. Nothing to do with that but replace it… While the strings are off it also needs a good cleanup…. Add a little lemon oil, brought the fretboard back to life nicely. […]
Fender Telecaster – Fret Dress
What a beautiful Guitar, sadly it just doesn’t play quite as well as it should. To get it spot on it needs a fret dress… They weren’t that bad but now they are spot on, just need to be re-shaped….. and polished. Looking good. Just needs putting back together and set up…. starting with the […]
Musicman Axis – re-fret
A slightly odd request, a re-fret just to change the feel of the guitar. The neck minus the old frets. Put a slight curve into the new fret-wire. and fit it the old slots. That leaves some very rough and sharp ends…. which need to be filled down evenly. After that each fret needs finishing […]
Broken Jazzmaster Nut
A fairly simple repair although setting up some guitars is a little more difficult… The bottom of the nut blank didn’t quite fit the slot. It’s a 7½” radius rather than the 10″ of the fretboard. While the strings are off it’s always worth giving the fretboard a good clean and oil. Here is the […]
Yamaha Pacifica setup
How well does your guitar play? This one was almost impossible. However all it needed was a little TLC and it’s a lot better… The frets are also a little uneven, but that’s a whole other job. The set in the neck is huge! You could drive a coach and horses under there! Not sure […]
Hohner Rockwood Re-build, 4th update
With a new neck plate I was able to re-fit the neck. At least it looks like a Guitar again. With the strings fitted I reset the neck set. with a tweek of the truss-rod. Reset the action height. and lastly the intonation. At long last, all back together. To see the project from the […]
BC Rich Bass
The new blank is a little thin but at least it’s long enough. In fact a little too long so I’ll have to take a little off the end. It doesn’t have slots marked so I need to mark them myself….. and start the slots. While the strings are off I gave the fretboard a […]