What a fantastic looking guitar. Got to love a Tele’, but a Tele with a Bigsby, even better! That black and white finish look just great. There’s some problems with the bridge though. It’s sitting rather low, I’m not sure if it’s able to rock backwards and forwards properly? The trouble is, if I raise it […]
Tag: Guitar setup
Ibanez RG – Fret Dress and Setup
I generally rate Ibanez guitars, but this one’s not so good. It’s got some very uneven frets. The only way to get it playing properly is to dress them all, to get a common level. It’s always easiest to do that with the neck off the guitar. There we go, taped up and levelled. As […]
Fender Stratocaster – Cleanup
Here’s a classic looking Strat, Just needs a bit of a clean, I think had a bit of damp at it. Nothing too bad, but that’s what I got off the face of the fretboard. The frets themselves were also a little corroded.. so gently polish them with steel wool It’s difficult to clean the […]
Hofner – Restoration
This is a little more of a clean and tidy-up than I’m used to, more of a restoration job really. It’s not seen any playing action for quite a while, so I’m not sure where I’m starting either? The head had a mod’ some time ago, three extra heads to make it a 9 string. […]
Vintage Acoustic – Fret Dress and Setup
Now there’s a great looking guitar. A real nod the 1960’s. I quite like Vintage guitars, they’re normally quite well made guitars but this one isn’t so good….. It’s got some very uneven frets. To really lift the tone I’m also going to replace the plastic bridge saddle with a bone one. Along with a […]
Gibson – Low Fret
Now this is a lovely guitar, a pity it’s just got that Gibson inconsistency about it. Some of the frets are rather uneven. The first one’s particularly low. The only way to really sort that lot out is with a fret-dress. There we go, with the fretboard flat, the nut removed and taped up to […]
PRS – Rebuild
A bit of a mess this one, but with a bit of effort I think it should be recoverable.. The first fault is rather obvious, it’s just between the nut and the machine heads! To glue it back together was quite simple, the break was along the grain. The trouble is there were some large pieces […]
Fender Precision Bass – Setup
A great looking guitar, just not playing at all well. I didn’t really need to measure the action, more like a step-ladder to reach it! Yeh, that’s possibly the highest action I’ve ever seen, even on a Bass. The bridge saddles were quite low though, and those pickups are rather close to the strings. While […]
Telecaster rebuild
Wow, an interesting mix of old and new. The neck is genuine Fender, but I don’t know about the rest. The body’s probably the heaviest Telecaster I’ve ever come across. I’m going to fit the neck to a new body with a mix of old and new hardware. The first stage is to sort out the […]
Tokai – New Pickups
A rather interesting looking guitar. The owner’s looking for an upgrade, so out with the old.. and in with the new..New Pots, Pickups and Switch etc…. The screws on the bridge needed a bit of a clean while I was at it….. The fretboard also needed a bit of a clean…. and oil… There was […]