This is nice, just not quite finished off very well.

The top of the bridge isn’t terribly well shaped, it needs a little wood taking off to bring it to a sharper point.

the bottom hasn’t been finished off very well either, there’s quite a gap between the ends of the bridge and the body.

with some low-tac drafting tape and adhesive sandpaper I sanded it to exactly fit the curve of the top.

There it is then resting nicely with the pressure spread evenly…

With the strings back, now that the bridge fits evenly and the top is more finely cut the guitar resonates and sustains a lot better, the strings slip more easily so it stays in tune when you bend strings.

 

For anything else just go to http://guitar-george.co.uk