An interesting little one, finishing of a project. Most of the hard work has been done, and they’ve made a good job of it, but I’ve been asked for a little help with the last little bit to get it playing properly… The first thing, the wiring. A couple of dry joints just needed sorting out…..With the […]
Tag: Electric Guitar Service
Fender or Gibson which do you prefer?
Most people stand in one camp or the other, Gibson or Fender, but this one crosses divides. It just came in for a once over, service and setup. A classic Fender? No, from the Gibson stable… Not a great deal wrong with it, just in need of a little TLC… The electrics were a little […]
Epiphone Flying-V
I can’t say as I really like these, but a classic nonetheless. This one’s going to get an upgrade with a new pair of pickups…While the pickguard is off, wiring in the new pickups, I also gave the pots and switch a clean…. Also, while the strings were off, I gave the fretboard a good clean…and oil…The new […]
Ibanez Floyd Rose
Floyd Rose Trems’ can be a pain sometimes. For some reason this guitar sounds out of tune at various points up and down the neck. The intonation seems OK so I’m not entirely sure what’s wrong. Since the owner doesn’t really use the trem’ I’m going to fit a couple of blocks in place to hold […]
Left/Right hand Stratocaster
Here’s an oddball, is it a Left-hand or Right-hand Strat? The owner had it custom made but it just needed a few tweeks to get the full potential from it. The first problem was the nut. The grooves were much too shallow which made the playing action at the first fret way too high. But […]
7 String Ibanes GIO- wonky neck
This proved to be an odd one. I’ve always rated Ibanez very highly, if you’re looking for a starter guitar you can’t do much better than a second hand Ibanez. This one proved to be a little more troublesome though…. At first thought it had a couple of high frets at the top end… but […]
Ibanez Blazer re-fret
Now that’s a worn set of frets! Might just get away with dressing them, but then they would be very very low.. Rather than that, I’m going to replace them with new ones.Out with the old…Putting a slight bend into the new fret-wire. Gently tap the new wire into place… and trim the spare end. […]
Gibson 335
Well 1st job of the year, that 335. For some reason it just doesn’t sound right. The strings don’t seem corroded but I’ve no idea how long they’ve been fitted. They’re a little light so I’m going to try a set of 10s and have a closer look at the setup…One problem I had was […]
#Jackson – Project
I picked this up a week or so ago. It’s not something I would even consider but a good friend of mine bought it on e-bay and it wasn’t exactly what he expected so I’ve taken it off his hands and I’m going to see what I can do with it. The first thing I did was […]
Troublesome Jack
Jack sockets quite often present problems, they wear out and the contacts become loose, this one was proving to be tricky on several counts…. It keeps falling out as the locking plate’s rather bent and twisted out of shape and isn’t locking into the wood. There’s also a third wire, I don’t know what that’s […]