Floyd Rose Trems’ can be a pain sometimes. For some reason this guitar sounds out of tune at various points up and down the neck. The intonation seems OK so I’m not entirely sure what’s wrong. Since the owner doesn’t really use the trem’ I’m going to fit a couple of blocks in place to hold […]
Tag: Electric Guitar
3 Pickup Telecaster
I love these modern Telecasters, the only problem is you can’t get the original sound of the neck and bridge pickups together? The switch works just like a Strat’.What I’m going to do is add a mini switch to just bring in the bridge pickup no matter what else is selected. The modern players have […]
Left/Right hand Stratocaster
Here’s an oddball, is it a Left-hand or Right-hand Strat? The owner had it custom made but it just needed a few tweeks to get the full potential from it. The first problem was the nut. The grooves were much too shallow which made the playing action at the first fret way too high. But […]
Ibanez Blazer re-fret
Now that’s a worn set of frets! Might just get away with dressing them, but then they would be very very low.. Rather than that, I’m going to replace them with new ones.Out with the old…Putting a slight bend into the new fret-wire. Gently tap the new wire into place… and trim the spare end. […]
Gibson 335
Well 1st job of the year, that 335. For some reason it just doesn’t sound right. The strings don’t seem corroded but I’ve no idea how long they’ve been fitted. They’re a little light so I’m going to try a set of 10s and have a closer look at the setup…One problem I had was […]
Happy New Year
Well here we are, another year! How’s that Guitar you got for Christmas? Not quite playing as easily or nicely as you would like? I’ll be in the Music Room, Lincoln on Saturday. Bring it down and I’ll have a look and see if it can be sorted out. I’ve got an interesting one as […]
#Jackson – Project
I picked this up a week or so ago. It’s not something I would even consider but a good friend of mine bought it on e-bay and it wasn’t exactly what he expected so I’ve taken it off his hands and I’m going to see what I can do with it. The first thing I did was […]
Troublesome Jack
Jack sockets quite often present problems, they wear out and the contacts become loose, this one was proving to be tricky on several counts…. It keeps falling out as the locking plate’s rather bent and twisted out of shape and isn’t locking into the wood. There’s also a third wire, I don’t know what that’s […]
Custom built Telecaster
The owner wanted to build the electrics himself so I’ve just got it back to complete the setup…. Looks good so far…First thing first, the neck set…It’s just a little high so I’ll need to tweek the truss-rod. Unfortunately the screw is on the bottom of the neck so I’ll have to take off the scratchplate. […]
Squire Precision Bass – Setup
A nice bass just in need of a little tweek here and there. The basic principles are the same, just a few subtle differences. Sadly the frets are a little uneven so I’m not going to get a really sweet action without a little buzz.The neck had rather too much set so I’ve flattened it […]