I was asked to have a look at a Les Paul with a view to improving the setup, a nice easy couple of hour job, (or so I thought)! The first thing of course is to have a close look to see exactly what needs doing to improve the playing. If the owner was completely […]
Tag: Electric Guitar
Gibson Flying V – 3rd update
Now that the glue has dried I can refit the pickups to drill the new holes. I’ve used cotton in place of the E-strings to make sure the location is right. Holes drilled and pickups installed. I’ve left a slight gap between the bridge pickup and the pickguard otherwise the hole for pickup would be visible […]
Gibson Flying V – 2nd update
I’ve started to fit the new parts but found another problem The pickups have been changed at some point and the holes for the pickup rings aren’t quite in the right place and they don’t quite sit squarely. The neck pickup isn’t too bad but the bridge pickup will have to be moved. I’ve filled […]
Gibson Flying V – 1st update
Having sorted out the sheered off strap button screws etc. Next I removed all the old bits and pieces, pickguard with electrics before giving the body a good polish to remove all the old dirt and minor scratches. Ready to start building in the new parts. Click here to see the start of the job.
Noisey Telecaster
I was asked if I could fix a noisy Telecaster, I thought that was the idea! However on listening there was an excessive amount of hum. I though it would be less complicated as you can get to the wiring without taking the strings off. However once I got it open I couldn’t immediately find anything […]
Stratocaster wiring problem
Should be a simple job, a crackly Strat’. Always an annoying problem but sometimes difficult to locate. At first I couldn’t really see (or hear) anything wrong, but that’s not really the answer so I opened it up to see what’s inside. The strings are a little worn and there’s always the chance of snapping one, […]
Gibson Flying-V Restoration
Gibson Flying-V Restoration This is bit of a long term job. I started a couple of months ago with a fret-dress but it’s time to start the rest of it. It should be quite simple apart from a couple of sheered off and striped out screw heads. The only way to get that screw out is bit […]
Music Room Lincoln
Guitar Surgery Something new, if you want something doing, but are not too sure about it, come in for a chat. I will be available in the Music Room Lincoln between about 10am and 1pm on Sat 25th May for free consultations. If it’s something minor that I can fix on the spot, such as changing a set […]
Gibson Explorer – Service and Setup
A fairly routine job, fit a new set of strings and check the setup. I found a few other bits and pieces that also needed putting right along the way. I’ve never really been a fan of these sort of guitars, one of the inevitable problems is you always end up bashing the ends on […]
Epiphone Emperor – 4th and final Update
Having got all the electrics fitted and working its now time to fit the new tailpiece and strings. Since I tidied up the top of the bridge earlier I also needed to re-cut some string slots in it. Firstly I fitted the 2 “E” strings to correctly place the floating bridge… Using the appropriate file I cut slots in the […]