These are very reasonable alternatives to their more expensive Gibson cousins. Someone’s fitted some really cheap machine heads though, so it needs tidying up and some new heads fitting. The old ones…With them all off it looks like it’s had a dose of woodworm!Before fitting the new heads I drilled out some of the old […]
Gretsch Black Falcon – Fret Dress and Setup
Wow, another big bodied Semi-Acoustic to play with! This one needs a lot more work to get it playing properly mind you. Some of the frets are very uneven so they’ll need levelling if it’s ever going to play nicely. Before removing the strings it’s always a good idea to mark exactly where the floating […]
Epiphone Wildkat – Setup
Anyone that knows me will know I do love big bodied semi-acoustics, so it was quite nice to get my hands on this little tinker….
Fender Acoustic – Action height
I quite like these Fenders, good value for money but sometimes in need of a little extra work to make the most of them. The action on this one was just a little high… The neck also had rather too much curve in it as well, which isn’t helping much. First things first then, tighten the […]
Classic Vibe Stratocaster – Setup
What a lovely Strat’, I never really used to like this colour, but it’s growing on me. There’s nothing much wrong with it mind you, just needs a bit of a setup. The first problem however was getting the old strings off… Why the plate on the back was on the wrong I’ve no idea? […]
Guitar Setup – Pickup Heights
The last step in any good electric guitar setup, the pickup heights…
Guitar Setup – Intonation
The last bit of the playing action, the Intonation….
Epiphone Setup
What a lovely Guitar, just in need of a tweek here and there to get it playing as it should. The frets were good and even so they didn’t need any work for once. Since it’s got a floating bridge I put some low adhesive tape on the body before removing the strings. That way […]
Guitar Setup stage 3: Action at the 1st fret
Hi folks, how’s that setup coming? Once you’ve got the bridge sorted now it’s time to set the action at the 1st fret, by cutting the slots in the nut…
Bone Nut
This one rather sits at the bottom end of the market, but even so, it should play OK. This one had a very strange “buzzing” sound. It’s all down to the cheap plastic nut with its overly slack slots. The only way to cure that is to fit a decent nut.The blank was just a […]